Louise MFT Monster Truck Tires - 1/8 MT-Pioneer Black Hex L-T3321BH

Louise MFT Monster Truck Tire - Black Hex 1/8 MT L-T3321BH – Conquer the Track!

“Unleash your inner wanderer with the Horizon Echo Journal – a handcrafted sanctuary for your dreams, reflections, and wildest adventures. Bound in supple, earth-toned leather and filled with thick, cream-colored pages begging to be filled with your most cherished moments. Let the subtle scent of sandalwood transport you to forgotten landscapes as you capture the magic of every sunrise, every whispered conversation, every unexpected delight. This isn’t just a journal; it’s a portal to possibility.”

$38.48 $76.95

num:

description

MFT 1/8 MT-Pioneer Monster Truck Tire Sport / 1/2 Offset Black Rim Hex 17mm / Mounted

Due to the extreme loads during driving, cornering and high jumps, the design of the wheel and the materials used are extremely important. The proper flexibility and strength allow the Louise RC wheels to withstand these heavy forces.

The Louise RC wheels are made of a mixture of high quality nylon granulates, charged with fiber or without. These composites have been specially developed by Dupont for Louise RC.

These tire sets fits Front - Rear

Most 1/8 Monster Trucks with 17mm wheel hex adapter
Arrma - Kraton
Arrma - Outcast
Arrma - Notorius
Hobao - Hyper MT
HPI - Savage X4.6
HPI - Savage Flux
HPI - Savage XL
Team Corally - Kronos
Team Corally - Dementor
Traxxas - E-Maxx Brushless
Traxxas - Revo 3.3
Traxxas - E-Revo Brushless

Tire inserts

The tires are mounted either with special preformed foam inserts or with cut-to-size foam inserts. The inserts are selected in a specific density and size in order to guarantee perfect dampening and form stability of the tire.

Mounted - Glued

Due to the extreme forces the tire must firmly bonded to the wheel. Louise RC takes the highest care in bonding the tires properly. For years they have been searching to find the best way to glue the tires well but also in a clean way. Today Louise RC is considered one of the best in the RC industry. The tires are glued with a special rubber cyanoacrylate glue. This glue has been specially developed for Louise RC to guarantee a perfect firm bond to withstand all extreme forces.

The following steps are performed in production at Louise RC in order to obtain a perfect bond

The rings of the rubber tire to be glued are slightly grinded and degreased.
The surface of the wheel where the tire will be glued is grinded up and degreased.
The tire is bonded to the wheel with cyanoacrylate adhesive using a special dosing machine. As a result, the equal amount of glue is always applied.
The bonded tire is pressed for a specific time in order to ensure perfect bonding and curing.
Each tire passes a spinning and pulling test to ensure perfect bonding.

MFT Technology

MFT stands for Micro Fiber Technology. This technology indicates the presence of a textile belt in the rubber tread of the tire to prevent the tire from deforming and ballooning during high speed operations.

The MFT technology keeps the tire in shape, even during powerful accelerations and high-speed runs.

The well-known ballooning of a normal tire without MFT technology that disturbs the entire shape and where the diameter of the tire changes under these extreme conditions, is now part of the past. The MFT Technology provides increased stability, significant more road contact and the tire life is extended.

Important

The tire with MFT technology is usually a bit heavier and larger in size then normal tires without the MFT technology. We recommend to check your gear ratio and adjust if needed. We also recommend to update your steering servo as these tires provide more grip and may overload a standard servo.

SPORT Compound

Louise RC has years of experience in producing high performance tires for RC cars. The RC hobby driver and the RC basher have totally different requirements for the tires than the RC competition car driver. From this experience the special sports rubber compound has been developed. The sport rubber compound comes in 2 densities, soft or medium-soft. For the lighter 1/10 cars the soft compound is mainly used and for the more powerful and usually heavier 1/8 models the medium-soft compound is applied.